Kisae - Inverter 2000 Watt Pure Sine with Transfer Switch and 80 Amp Charger - BIC1220080
- Description
- Specs
- Downloads
KISAE's newest release is the Bi-Directional series of Inverter Chargers. The BIC1220080 packs a 2000 Watt Inverter and a 80 Amp AC charger into one unit. What, you might ask, is special about a 2000W / 80A Inverter Charger? This unit was developed from the ground up to combine the charging hardware and the inverting hardware onto one PCB (mother board) inside the unit. Traditional construction wired separate inverter and charger boards inside one housing. This Bi-Directional construction method has resulted in a more robust unit, which can provide pure sine inverting and 80 Amps smart charging all at a very attractive price point.
Features And Benefits
- High wattage power inverter • True sine wave output
- 120Vac output versions available
- 230Vac output versions available
- High amperage battery charger
- Micro-processor controlled
- Regulatory Approved to cETus standards for North America, and CE standards for EU, UK, AU and NZ
- Multi-stage charging algorithm
- Charges a variety of battery types
- Lightweight compact design
- Built-in CAN BUS communication
- Accepts AC or DC input sources
- Built-in load sense to minimize battery drain
- Comes with remote panel included for unit setting and monitoring
Dimensions (L x W x H):
BIC122080: 15.4“ × 11.9” × 4.2” (391 x 302 x 106mm)
Weight:
BIC122080: 17.6 lbs. / 8.0 Kg
| AC Output Power (Continuous) | 2000W |
| AC Output Power (Peak – 1 second) | 4000W |
| AC Output Voltage/Frequency | 120VAC / 60 Hz |
| AC Output Current | 16.6A |
| AC Output Current (Peak) | 40A max (with max power limitation) |
| AC Output Waveform | True Sinewave (<5% THD) |
| Peak Eciency | 90% |
| Input Voltage (nominal) | 12.5Vdc |
| Input Voltage Operation Range | 10.5 – 16.5Vdc |
| Input Standby Current | <3.0A |
| Input Standby Current (Power Save) | < 0.6A |
| Charger Voltage Range | 13.8 – 14.8V (Selectable) |
| Float Voltage Range | 13.0 – 14.0V (Selectable) |
| Charger Current | 10 – 80A |
| Charger Battery Type | Gel, Flooded, AGM, Lithium, Programmable, Power Supply |
| Charging Stages | Check, Bulk, Absorption, Float, Recharge |
| Recharge Voltage Range | 13.0 – 14.0 V (Selectable) |
| Recharge Timer | 7-days (automatic) |
| Power Sharing | Reduce Charger Current when heavy AC Load is connected |
| AC Input Voltage/Frequency | 120 VAC (Accept MSW AC Input) |
| AC Input Voltage Acceptance Range: | 108 – 132 VAC |
| Transfer Time | < 30ms |
| Transfer Relay Rating | 30A |
| AC Input Port | Hardwire 30A Heavy Duty Connector |
| AC Output Port | Hardwire 30A Heavy Duty Connector |
| AC Input Socket | NEMA 5-20 GFCI (Optional) |
| Battery Input Undervoltage Shutdown: | 10.5 – 12.0Vdc (with dynamic control) |
| Battery Input Undervoltage Warning: | 11.0 – 12.5Vdc |
| Battery Input Undervoltage Recovery: | N/A |
| Battery Input Overvoltage Shutdown: | 16.5Vdc |
| Inverter Overload Warning/Shutdown: | 1800W / 2200W |
| Unit Over-temp Warning/Shutdown: | Yes |
| Power On/O Switch | Yes (Push Button) |
| Indicator | 3 LEDs (Power, AC Output, Unit Status) |
| Remote Display Port | For Remote Display Panel use |
| Battery Temperature Sensor Port: | For use with Battery Temperature Sensor (BTT) |
| Ignition Start Port | For use with Vehicle ‘ACC’ signal |
| Indicator (LED) | Power, AC Output, Unit and Battery Status Display Type |
| Numerical Display Function | Battery Voltage, AC Power, DC Current |
| Graphics Display Function | AC Bypass, Battery Power, AC Input, Battery Status Warning/Fault Code |
| Communication | CAN BUS, Bluetooth (optional), LIN (optional) |
| USB Port | Unit software upgrade |
| Markings | cETLus |
| Conformance | UL & CSA Standards |
| EMI/EMC | FCC Part 15 Class B |
| Dimensions (L x W x H) | 15.4“ × 11.9” × 4.2” (391mm x 302mm x 106mm) |
| Net Weight | 17.6 lbs. / 8 kg |